| Base Material |
Iron (Fe) |
| Alloying Elements |
Carbon, Manganese, Silicon, Sulfur |
| Galvanization Coating |
Zinc |
| Pipe Wall Thickness |
1.2 mm to 10 mm (varies by size and application) |
| Diameter |
15 mm (1/2 inch) to 150 mm (6 inches) or customized |
| Tensile Strength |
350 to 550 MPa |
| Yield Strength |
200 to 350 MPa (depends on diameter) |
| Elongation |
20% to 30% in standard test specimen |
| Hardness |
150 to 200 HB |
| Thermal Conductivity |
50 to 60 W/m·K |
| Chemical Resistance |
Good resistance to many chemicals |
| Thermal Expansion Coefficient |
Approximately 12 to 14 × 10⁻⁶ /°C |
| Length |
6 meters (approximately 20 feet), customizable |
| Weight per Meter |
Varies with diameter and wall thickness |
| Surface Finish |
Hot-Dip Galvanization |
| End Preparation |
Plain End / Threaded And Coupled / Cut End |
| Hydrostatic Pressure Test |
1.5 to 2 times the maximum operating pressure |
| Pneumatic Pressure Test |
Performed |
| Galvanizing Test |
Coating Thickness / Adhesion / Corrosion Resistance / Visual Inspection |
| Zinc Coating |
Hot-Dip Galvanization / Electroplating / Zinc Spray / Mechanical Plating |
| Adhesion Test |
Bend / Scratch / Adhesion Tape / Pull-Off / Impact |
| Marking |
Stenciling / Stamping / Laser Marking / Etching / Tagging / Inkjet Printing |
| Humidity Resistance |
Corrosion Prevention / Material Longevity / Performance Stability |
| Salt Spray Resistance |
Resistance to salt-induced corrosion, relevant for coastal/industrial environments |
| Colour |
Natural Zinc Coating / Aged Coating |
| Cylindrical Bending Test |
ASTM A53 / A53M |
| Scratch Resistance Test |
Taber Abraser / Pencil Hardness / Scratching / Cross-Cut |
| Production Capacity |
As per client requirements |
| Pipe End |
Plain / Threaded / Beveled / Flanged / Socket |
| Coating Process |
Electrostatic Deposition of FBE / DFBE & PP / PE |
| Protective Coating |
Standard Corrosion Protective Coating |
| Layers of Coating |
3 LPP / 3 LPE / DFBE |
| Test Performed |
Hydrostatic / Eddy Current / Flattening / Chemical Analysis / Other Standard Tests |
| Min Order Quantity |
As per client or project requirement |
| Applicable Industry |
Plumbing and Water Supply, Agricultural, Industrial, Oil and Gas, Infrastructure, Transportation |
| Warranty |
Available if required in bulk quantity |
| Payment Terms |
Depends on buyer requirements and order quantity |
| Mode of Payment Acceptance |
All types of payments accepted |
Reviews
There are no reviews yet.